Clean and Mold Free Home: 8 Mold Proofing Tips

The homeowner may find mold in their home, leading to property damage or health problems. It can develop on virtually any surface, including clothing, carpets, and even in places that are difficult to notice, like walls and above ceiling tiles.

Excess moisture is a common cause of mold formation, therefore controlling the amount of moisture in your home is the best approach to avoid it. These guidelines will help you maintain moisture and prevent mold growth.

Mold Removal from Your House

1. Locating and Fixing Potential Problems

While mold proofing your home might not be feasible, it is possible to minimize the likelihood of developing the condition by taking care of the most delicate and moist areas. This means inspecting your sump pump and gutters, fixing condensation on windows and pipes, and removing damp furniture and carpeting.

2. Clean Surfaces

Scrub any moldy surfaces with a firm brush, hot water, and an ammonia-free soap or detergent. Take the liquid that has been used up using a wet/dry mop, vacuum, or a sponge. Rinse the area and then dry it thoroughly. You can go online to see everything you should know about household mould.

3. Disinfect Surfaces

Clean the walls, ceiling, floor, or wall using a liquid household bleach with water mix after cleaning the afflicted area in the manner described above. Be sure to follow all guidelines and warnings concerning bleach. If you are using bleach, be sure to open windows to breathe in the fresh air and ensure that the bleach won’t harm your lungs.

4. Dry Wet Areas

It is essential for mold to thrive with water; thus, removing moisture is crucial to stop mildew. Seepage and spills must be cleaned up promptly, and if your home has been damaged by flooding and you need water restoration companies’ help to restore water damage. Also, you can ensure that your home is dry by washing down the bathroom floors and walls after every shower and not leaving sticky residue on the floor.

5. Ventilation

Good ventilation can help reduce moisture levels in your home, especially in high-moisture places like the kitchen and bathroom. Be sure that items that need to be vented, such as the dryer and stove, are vented outside your home. Ventilation can also be improved by using an air conditioner or dehumidifier and opening windows.

6. Mold Resistant Products

Consider utilizing mold-resistant drywall or sheetrock, as well as mold-inhibiting paint, whether building a new home or renovating an existing one. In contrast to regular drywall, the mold-resistant drywall is entirely paper-free and ideal for moist areas such as the bathroom, kitchen basement, and laundry rooms.

7. Keep Gutters Clean and Functional

It is critical to keep your gutters in good functioning order and clean so that rainwater may flow correctly and be directed away from your house. If your drains are blocked, they may overflow, causing extra water to collect on the roof or close to the house’s foundation. Click here for additional information.

8. Control Humidity Level

Your home shouldn’t be humid to the point of 60%. It is recommended to keep it in the range of 30%and 50%. A moisture gauge can be utilized to check the humidity levels in your home and look for signs of excessive humidity, such as condensation.

The growth of mold can occur in your home and cause severe issues. But you can stop mold growth by following easy steps to lower the humidity. It is imperative to contact an expert in mold remediation if your home is already contaminated.

About The Author